---
title: "Steam Library Logo: Transparent PNG Size and Setup — Capsule Press"
description: "How to make a Steam library logo on a transparent background: the 1280 × 720 size, the width or height rule, and a check before you upload."
url: "https://capsulepress.io/articles/steam-library-logo-transparent-png"
updated: "2026-11-19"
---

[All guides](https://capsulepress.io/articles)

Library assets · November 19, 2026 · 5 min read

# Steam Library Logo: Transparent PNG Size and Setup

How to make a Steam library logo on a transparent background: the 1280 × 720 size, the width or height rule, and a check before you upload.

A Steam library logo is a 1280 × 720 image that holds your game logo alone on a transparent background. The logo itself should be 1280 px wide or 720 px tall, so it fills the canvas in one direction. A transparent PNG is the usual way to get that transparency, but confirm the accepted file formats on the [Steamworks store assets page](https://partner.steamgames.com/doc/store/assets) before you export.

## What the library logo is for

The library logo is its own asset. It is not a cropped piece of your key art and it is not a capsule. The rule is simple: the logo alone, nothing else, on a transparent background.

That "nothing else" matters. Leave out the tagline, the studio name, a version badge, review quotes and any background colour. If a word is not part of your logo, it does not belong in this file.

It also helps to know where the logo does and does not go across your other library assets:

| Asset | Size | Logo rule |
| --- | --- | --- |
| Library Logo | 1280 × 720 | The logo alone, transparent background |
| Library Capsule | 600 × 900 | Steam asks for the game logo, and no other text |
| Library Header Capsule | 920 × 430 | Artwork and a legible logo, no other text |
| Library Hero | 3840 × 1240 | Artwork only: no words and no logo |

The hero is the one that trips people up. Do not bake your logo into the hero artwork, because the logo has its own asset. For how the hero itself works, see our guide to the Library Hero safe area.

## The size rule: 1280 wide or 720 tall

The canvas is 1280 × 720. The logo inside it should be 1280 px wide or 720 px tall.

In practice that means:

- **A wide logo** (a long wordmark) should stretch to the full 1280 px width. Its height will be less than 720 px, and the transparent space above and below is fine.
- **A tall or square logo** (a stacked title or an emblem with text) should reach the full 720 px height. Its width will be less than 1280 px.
- **Do not shrink the logo** to float in the middle of the canvas with wide empty margins. A logo that reaches neither 1280 px wide nor 720 px tall is not following the rule.

A quick way to check: look at your logo's bounding box. Trim away empty transparent space first, then scale the logo until one side meets the limit. If it would be wider than 1280 px or taller than 720 px at that point, scale it down until it fits inside the canvas, then recheck against the rule.

## Preparing a clean transparent background

Most bad library logos fail at the edges, not the size. Work through these steps:

1. **Start from the largest, cleanest version of your logo you have.** A vector file or a source image larger than the biggest asset you need will scale better than a small screenshot.
2. **Remove the background completely.** Magic-wand cutouts often leave a faint halo of the old background colour around letters.
3. **Check the edges on both a dark and a light background.** A logo that looks fine on white can show a pale fringe on dark, and the reverse. A transparent logo will always sit on top of something else.
4. **Keep soft effects honest.** A glow or shadow that is part of your logo can stay, but make sure it is saved with real transparency and not painted onto a solid colour.
5. **Trim, then place.** Crop to the logo's bounds, scale to the 1280 px or 720 px rule, and centre it on the 1280 × 720 canvas.
6. **Export with transparency on.** Open the exported file in a viewer that shows a checkerboard or a coloured backdrop to confirm the background is really empty.

## Keep the logo consistent across assets

Your library capsule and library header capsule also need a legible logo, so use the same logo artwork everywhere. A different version of the title on each asset makes the game look inconsistent.

The small capsule has its own rule too: the logo must stay legible at a small size. If your logo has a thin subtitle line, a decorative script or low-contrast detail, test it at thumbnail size. If the subtitle disappears, consider a simplified lockup for the smaller assets, or leave the subtitle out, as long as the game name stays readable.

## Common mistakes

- **A solid white or black box behind the logo.** This usually means the file was flattened. Re-export with the background layer hidden.
- **A tagline or "Out now" line under the logo.** The library logo is the logo alone. Remove anything that is not the logo.
- **A logo floating small in a large empty canvas.** It breaks the 1280 px wide or 720 px tall rule.
- **Clipped letters.** If a logo is wider than the canvas, the edges get cut. Scale it to fit.
- **Logo painted into the hero.** The hero is artwork only, with no words and no logo.
- **Rough, jagged edges.** These usually come from scaling a small raster logo up. Go back to a larger source.

## Where Capsule Press can help

If you want to see the logo against your real artwork before you export, the free [Store Art Pack](https://capsulepress.io/app/art-pack) lets you load your own art, place an optional transparent logo, set a crop for each store and library asset, and check thumbnails of every asset. It runs in your browser with no sign-in, your artwork is never uploaded, and you download one clearly named ZIP. It does not upload anything to Steam. You still add the files yourself in Steamworks.

## Before you upload: checklist

- The library logo canvas is 1280 × 720.
- The logo is alone: no tagline, no extra text, no background.
- The logo is 1280 px wide or 720 px tall.
- The background is truly transparent, checked on both a light and a dark backdrop.
- Edges are clean, with no halo or jagged pixels.
- The same logo appears on the library capsule and library header capsule, with no other text on them.
- The library hero contains no logo and no words.
- Accepted file formats and any size limits are confirmed on the [Steamworks assets page](https://partner.steamgames.com/doc/store/assets).
- You have read the [asset rules](https://partner.steamgames.com/doc/store/assets/rules) once more before submitting.

The Steamworks pages are the place to confirm anything this guide does not cover, such as accepted formats, file size limits and exactly how Steam presents the logo in the library.

Sizes and rules follow the Steamworks documentation as read in November 2026. Check the official Steamworks page before you upload.

## Crop your Steam art in your browser

The Store Art Pack is free: set a crop for every store and library asset, check the thumbnails and download one ZIP.

[Open the Store Art Pack](https://capsulepress.io/app/art-pack)

## More guides

- [Steam Artwork Override Text Rules: Allowed and Banned](https://capsulepress.io/articles/steam-artwork-override-text-rules)
- [Steam Winter Sale Artwork Overrides: A Prep Plan Before December 17](https://capsulepress.io/articles/steam-winter-sale-artwork-override-prep)
- [Localizing Steam Artwork Overrides: Rules and Checklist](https://capsulepress.io/articles/localize-steam-artwork-overrides)

```json
{
  "@context": "https://schema.org",
  "@type": "Article",
  "author": {
    "@type": "Organization",
    "name": "Capsule Press"
  },
  "datePublished": "2026-11-19T03:04:02.018Z",
  "description": "How to make a Steam library logo on a transparent background: the 1280 × 720 size, the width or height rule, and a check before you upload.",
  "headline": "Steam Library Logo: Transparent PNG Size and Setup"
}
```
